|
Product Details:
|
Compatible System: | Windows 7 8 10 / Android / Linux / IOS /Mac OS | Sensor: | Ccd Image |
---|---|---|---|
Decode Speed: | 300 Times /s Max | Battery: | 1200mAh Battery |
Language: | Multi Language | Vibration: | Vibration Can Be Setted |
High Light: | 1200mAh Finger Barcode Scanner,CCD Finger Barcode Scanner,CCD Wearable Ring Scanner |
Flash | 16MB, storage more than 130000 data |
Barcode scanning | EAN13,EAN8 ,39,93 ,128,UPCA ,UPCE |
Compatible system | Windows 7 8 10 / Android / Linux / IOS /Mac OS |
Sensor | Linear CCD Sensor |
Light Source | Red Light , wave length 632 nm |
Decode Speed | 300 times /s max |
Connection | wired / bluetooth |
Transmission Distance | 50m in bluetooth mode |
Memory | 16M |
Battery | 300mAh battery |
Data upload
Select a transmission mode
Instant upload mode
After connect to a host , the transmission mode will be instant upload mode by default .
If the Bluetooth signal breakes , there will be two short beep from the scanner to alert
If the data transmitted to the host successfully , it will be a short beep from the scanner .If fail the transmission , it will be 3 shorts beeps , and the data won’t be stored and re-transmit , you will need to scan again . If you need instant upload , you can scan the instant upload barcode on the manual .
Storage mode
If the scanner is too far from the host or working in obstructed environment ,storage mode is recommended for the transmission signal may be unstable .In this mode , barcodes data will be stored in the device an d only transmitted to the host when you want to . Scan the code “Storage Mode “ on the manual to enter ,After a scan , if the barcode was successfully collected , it will be a short beep . After scanning all barcodes you want to collect , scan the code “Upload”on the manual to upload data collected .If the memory is empty , the scanner will long beep and vibrate , no data will be uploaded to the host .If the memory space is full , it will be 3 short beeps to alert .To check the quantity of all barcodes collected , please scan the code “memory “ on the manual . To clear all data collected and free up storage space , please scan the code “Clear “on the manual .
Contact Person: eva
Tel: +86 18271121530